破解 Vista 30 天試用…

天呀, 居然簡單成咁…XDDDDDDDDDDD

  1. 方法就係安裝前入 BIOS 將時間較去未來 (e.g. 2010 年 1 月 1 日)
  2. 然後安裝一個 timer stopper
  3. reboot 入 BISO 還原時間, 完成

Source:
http://hiroji.bglb.jp/win19/win21.html

這邊看到,原來 MacOS 已經不用 BIOS 了…M$ 真的很落後耶…XDDD 假如說為了讓較舊的低板也可以安裝 Vista 而繼續使用 BIOS,我想也是說不通的…既然安裝 Vista 的要求已經幾乎要我們換掉整台電腦,何不索性一刀切要求我們一定要換電腦才能使用 Vista 呢? 反正那個 eyes candy 的介面不換機是享受不到的,只會痛苦…XDDD

[Added on 2007/02/22]

Via: keznews.com

New Windows Vista instalation:

1. Go to your BIOS, set the year to 2099.
2. Disconnect Internet (physically pull out your LAN cable if you will tongue.gif )
3. Install Vista. DO NOT enter any key while installing, and select the Ultimate edition.
4. Once vista boots up for the first time, set the year back to 2006 (from within Vista). Remember, internet should still be disconnected.
5. Reboot, and check date in BIOS to make sure its 2006.
6. Use enclosed patch
7. Unzip the patch and run the exe.
8. Click on test. It should say 4 timers stopped.
9. Click on the install button.
10. Reboot.
11. Connect Internet
12. Test by typing “slmgr -dlv" in the command prompt (in administrator mode), and note the minutes.
13. After about an hour of use, reboot and redo step 12. The minutes should remain same!
14. Enjoy!

If you already have vista installed, you dont need to re-install it. You can just re-arm in 2099. Steps:

1. Go to your BIOS, set the year to 2099.
2. Disconnect Internet (physically pull out your LAN cable if you will tongue.gif )
3. Boot vista, open command prompt in administrator mode and type “slmgr -rearm". Wait for the command to complete, and then reboot.
4. Once vista boots up, set the year back to 2006 (from within Vista). Remember, internet should still be disconnected.
5. Reboot, and check date in BIOS to make sure its 2006.
6. Use enclosed patch
7. Unzip the patch and run the exe.
8. Click on test. It should say 4 timers stopped.
9. Click on the install button.
10. Reboot.
11. Connect Internet
12. Test by typing “slmgr -dlv" in the command prompt (in administrator mode), and note the minutes.
13. After about an hour of use, reboot and redo step 12. The minutes should remain same!
14. Enjoy!

發表迴響

在下方填入你的資料或按右方圖示以社群網站登入:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / 變更 )

Twitter picture

You are commenting using your Twitter account. Log Out / 變更 )

Facebook照片

You are commenting using your Facebook account. Log Out / 變更 )

Google+ photo

You are commenting using your Google+ account. Log Out / 變更 )

連結到 %s